Page -6-
CLARKE TECHNOLOGY Operator's Manual -Vision 17B/BT
PROCEDURES FOR TRANSPORTING
How to Put the Machine Into a Van or Truck
WARNING:
This machine is heavy. Get assistance before attempting to transport or move.
Use two able persons to move the machine on a ramp or incline.
Always move slowly. Do not turn the machine on a ramp. Do not stop and leave
the machine on a ramp or incline.
To load the machine into a van or truck follow this procedure:
1.
Remove the squeegee and the brush (see "How to Prepare Machine for Operation").
2.
Obtain a loading ramp that is at least 8' long and secure enough to support the weight of the machine.
3.
Make sure the ramp is clean and dry.
4.
Put the ramp into position and secure.
5.
Align the machine on a level surface in front of the ramp.
6.
With the assistance of another person, guide the machine up the ramp slowly.
7.
Securely fasten the machine to the vehicle.
How to Remove a Machine From a Van or Truck
To remove the machine from a van or truck, follow this procedure:
1.
Make sure that there are no obstructions in the area.
2.
Obtain an unloading ramp that is at least 8' long and strong enough to support the weight of the
machine.
3.
Make sure the ramp is clean and dry.
4.
Put the ramp into position and secure.
5.
Untie the machine.
6.
With the aid of another person, carefully guide the machine out of the truck or van onto the unloading
ramp slowly. Never stand below machine or ramp.
7.
When guiding the machine on the unloading ramp, position yourself to maintain a slow speed.
