CLARKE TECHNOLOGY Operator's Manual - Vision 17B/BT
Page -7-
Brush Switch.
See Figure 1.
The brush switch is to the left of the vacuum
switch on the control panel. To start the brush
motor, press the top of the switch. To stop the
brush motor, press the bottom of the switch.
Vacuum Switch.
See Figure 2.
The vacuum switch is to the left of the solution
control knob. To start the vacuum motor, press
the top of the switch. To stop the vacuum motor,
press the bottom of the switch.
Solution Control Knob.
See Figure 3.
The solution control knob is in the middle of the
control panel. For more solution, turn the knob
to the right. For less solution, turn the knob to
the left.
Circuit Breakers
.
See Figure 4.
There are two circuit breakers. One to protect the
vacuum motor and one to protect the brush drive
motor. The circuit breakers are located on the lower
left side of the tank support. Push the circuit
breakers to reset the vacuum drive motor or the
brush drive motor. For the traverse model there is
one additional circuit breaker for the traverse motor.
Figure 1
Figure 2
Figure 3
Figure 4
MACHINE CONTROLS and FEATURES
