CLARKE TECHNOLOGY Operator's Manual - Vision 17B/BT
Page -9-
Traverse Speed Control.
See Figure 10
The traverse speed is controlled by a variable speed
knob. Turn the knob clockwise to increase speed.
Brush Pressure Adjustment.
The brush pressure can be adjusted for normal
cleaning or for stripping. Locate the knob on the rear
of the brush motor. To access motor, turn off the key,
remove the squeegee cable and undo tank clamps.
Turn the knob clockwise to increase brush pressure
(strip mode). Turn the knob counterclockwise to return
to normal cleaning.
Machine Control Handle.
See Figure 11
The machine control handle is located on the back
side of the machine. The handle is adjustable for
operator comfort and ease. The handle adjustment
knobs are located at the base of the handle.
Machine Lift Handle
. See Figure 12.
The machine lift handle is located on the front of the
machine. Use this handle to lift the machine when
changing the brush. See the section in this Owner's
Manual "Installing or Removing a Brush or Pad Driver".
Machine Support Leg.
See Figure 13.
The machine support leg is located in the front of the
machine under the bumper skirt. Put the machine
support leg down when installing or removing a brush or
pad driver.
Figure 10
Figure 11
Figure 12
Figure 13
MACHINE CONTROLS and FEATURES (cont'd)
