background image

CTP Combitherm

50       

       MN-35948       

       Rev 16       

       10/18       

       Combitherm® CT PROformance™ Series Operator’s Manual

•  Removable, cleaner support tray 

can be mounted on the left  or right 

exterior wall of the oven. Slide 

slotted openings on the tray over the 

mounting studs.

•  Support tray holds a 2-1/2-gallon 

(9,5 liter) bottle and measures 

10-1/2" x 7-3/4" (267mm x 194mm).

•  Place liquid oven cleaner bottle 

inside tray.

•  Wearing protective rubber gloves and 

eye wear, remove cap from liquid 

oven cleaner bottle. Pull out the 

Cleaner Cap and Tubing Assembly 

from the back of the unit screw on to 

liquid oven cleaner bottle.

•  Position cap to ensure the hose is not 

kinked aft er tightening. 

•  Combitherm liquid oven cleaner jugs 

are quickly and easily replaced.

•  Combitherm liquid oven cleaner 

is automatically pumped through 

the system, saving labor and 

providing greater employee safety 

by eliminating the need to handle 

caustic cleaning liquids each day.

Support Tray

Support Tray 

Slotted Opening and 

Mounting Studs

Cleaner Cap and 

Tubing Assembly

WARNING

To prevent SERIOUS INJURY or DEATH, 

NEVER operate this appliance in a cleaning 

mode without the liquid cleaner connected, 

with a kink in the cleaning hose line, or with 

an empty liquid cleaner container. Failure 

to do so may result in poor oven cleaning, 

grease and/or carbon accumulating inside 

the oven cavity and increased risk of fire.

WARNING

ALWAYS wear protective eye wear and rubber gloves 

when using liquid oven cleaner to prevent eye, skin, and 

respiratory tract irritation.

Keep out of reach of children.

See Safety Data Sheet for additional information.

   WARNING

To prevent 

serious personal injury

death

or 

property damage

:

The appliance must be cleaned thoroughly 

to avoid deposits of grease and or food 

residues inside the appliance that may 

catch fire. If fat deposits and/or food waste 

inside the appliance ignite, shut down 

the appliance immediately and keep the 

appliance door closed to extinguish the 

fire. If further extinguishing is required, 

disconnect the appliance from the main 

power and use a fire extinguisher (do not 

use water to extinguish a grease fire!). 

Failure to clean the appliance properly 

invalidates the warranty and relieves 

Alto-Shaam of all liability. 

Connecting the Optional Liquid Cleaner

Summary of Contents for COMBITHERM CTP6-10e





















































































Reviews: