Altman AIP-200-RGBL-B User Manual Download Page 44

Page: 44 / 46

Page 44

Hydra Series AIP-200 LED Luminaires

Installation & Users Manual

Cleaning And Care

WARNING! All cleaning should be performed with power completely removed from the luminaire. Never remove

protective covers when luminaire is powered. Wear appropriate protective eye wear and gloves when cleaning the

fixture. All service and maintenance, other than described herein, should be performed by a qualified technician or

Authorized Service Center. AT NO TIME SHOULD THE LEDs BE TOUCHED.

Cleaning Instructions

Being a solid-state fixture IP65 luminaire, the AIP-200 requires very little routine maintenance by the user.

The luminaire requires special care to be taken with the plastic components because they are much easier to

scratch or damage than glass.

The AIP-200 requires special care when it comes to cleaning front lens assembly. Additional care needs to be

taken with the plastic components because they are much easier to scratch or damage than glass.

The following is a list of cleaning materials required to care for the AIP-200:

•

Lint free lens tissue

•

Lint or powder free gloves

•

A mild soap solution.

WARNING! Under no circumstances should ammonia-based cleaners, acetone, or other harsh solvents

be used on or near the Back-Lit Panel. These types of cleaners or solvents can permanently damage the optics or

housings of the fixture.

Service and Maintenance

For all other service and maintenance issues, please contact your local Altman Lighting office or an

Authorized Service Center.

WARNING! Disassembly, alterations, unauthorized service, etc. will void the product warranty. Contact

your local Altman Lighting office or an Authorized Service Center for technical support and service

Cleaning the Front Lens

Step 1. Turn off luminaire and allow to cool completely.

Step 2. Apply a small amount of mild soap solution to lint-free lens tissue.

Step 3. Wipe all debris, dirt, fingerprints, etc. From the lens.

Step 4. Using a second lint-free lens tissue, wipe off any residue.

Summary of Contents for AIP-200-RGBL-B















































Search results

Summary of Contents for AIP-200-RGBL-B

Reviews:

Related manuals for AIP-200-RGBL-B

Brands by name

Popular brands

Altman AIP-200-RGBL-B, User Manual

Search results

Summary of Contents for AIP-200-RGBL-B

Reviews:

Related manuals for AIP-200-RGBL-B

Brands by name

Popular brands