Page 14
Hydra Series AIP-200 LED Luminaires
Installation & Users Manual
Step 1 - Navigate to MODES
MODES in the menu.
Step 2 - Press Enter.
Step 1 - Press up or down buttons until the required mode is
reached.
Step 2 - Press Enter.
Dimming Curves
Linear
- When set to Linear, the dimming curve is in
direct relationship to the DMX value. For example, if
the DMX value of the DMX slider is at 25% of its range,
then the signal to the luminaire (and its output) will
also be at 25%. (Default)
3 dimming curves are available. The options are:
Linear
Step 1 - Navigate to Curves
Curves in the menu.
Step 2 - Press Enter.
Incandescent
: When set to Incandescent, the dimming
curve, (also called a logarithmic curve by some
manufacturers), sets the luminaire to mimic a dimming
effect that is perceived as linear (naturally
following an incandescent lamp fade).
Incandescent
Standard
: When set to Standard, the dimming curve
(also called Square by some manufacturers) results
in a dimming effect that follows a slow or soft bottom-
end response and follows a linear line at the top
end.
Standard
