Altman AIP-200-RGBL-B User Manual Download Page 9

Page: 9 / 46

Page 9

Hydra Series AIP-200 LED Luminaires

Installation & Users Manual

Daisy-Chaining Units

When daisy-chaining units, do not exceed the number of units as shown in the table below. Also, please

make sure to read and understood the warnings contained in this section of the manual (“Power

Connection Warnings”.)

AC Power Input

AC Power Output

VOLTAGE

Max Qty. / Circuit

120VAC

230VAC

Connecting DMX

The AIP-200 Luminaire offers two DMX512 connections. One for DMX Input (from a DMX

source) and one DMX throughput (out). Basic DMX512 installation consists of connecting multiple DMX

controlled AIP-200 Luminaire together (up to 32 Total devices per DMX string) in “daisy-chain” fashion. A

cable runs from the DMX512 control source to the DMX INPUT connection on the first luminaire. From the

DMX OUTPUT of the luminaire another cable runs to the DMX IN connector on the next luminaire (or DMX512

device to be controlled).

At the end of each DMX Daisy chain, it is highly recommended that a DMX TERMINATOR (Altman

Lighting part number DMX-5-TERM) is installed on the last luminaire (or device) in the chain.

For more information on installing DMX512 control systems, the following publication is available for pur-

chase from the United States Institute for Theatre Technology (USITT), “Recommended Practice for DMX512:

A Guide for Users and Installers, 2nd edition” (ISBN: 9780955703522).

USITT Contact Information: www.usitt.org

DMX - XLR Connectors

The table to the right shows the pin-out and

corresponding DMX signals for a 5-pin XLR

connector.

Common (Drain)

Pin 1

DMX -

Pin 2

DMX +

Pin 3

Not Used

Pin 4

Not Used

Pin 5

DMX Input

DMX Output

Please ensure that all water tight

caps for power and data are

installed when not in use.

Summary of Contents for AIP-200-RGBL-B















































Search results

Summary of Contents for AIP-200-RGBL-B

Reviews:

Related manuals for AIP-200-RGBL-B

Brands by name

Popular brands

Altman AIP-200-RGBL-B, User Manual

Search results

Summary of Contents for AIP-200-RGBL-B

Reviews:

Related manuals for AIP-200-RGBL-B

Brands by name

Popular brands