Altice Labs FGW GR140DG Wi-Fi 6, User Manual

Page: 30 / 101

30
Technical specifications
Hook flash
on-hook - register
recall/hook flash
150 msec
Minimum time of
recognition of “on-hook”
when hook-flash feature
does not exist
on-hook - register
recall/hook flash
1100 msec
Minimum time “on-hook”
recognition when hook-
flash feature does exist
off-hook 40 msec
minimum time “off-hook”
recognition
interval
300 msec –
1100 msec
Time calibrated break pulse
duration for register recall
recognition
Pulse Dialing
Detection
Pulse Frequency: 10 Hz
(8 Hz to 12 Hz)
Pulse Relation (%): 60/40
-
DTMF Dialing
Detection
- According to ANSI/TI A-1063
Clip - According to ANSI/TI A-1063
Clip on Call Waiting - According to ANSI/TI A-1063
Tabel 4: FXS interface specifications FXS
(3)
3.1.4 Wi-Fi
Items Compliance Description
IEEE 802.11 b/g/n/ac
/ax
-
Bit Rates 802.11 b/g 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54Mb/s
802.11 n Up to 600Mb/s over four spatial streams in the
2.4GHz band;
Up to 600Mb/s over four spatial streams in the
5GHz band
802.11 ac Up to 1733Mb/s over four spatial streams in the
5GHz band
802.11 ax Up to 4800Mb/s over four spatial streams in the
5GHz band
SSID - Up to 8
Operation
Frequencies - 2.4GHz (ISM) or 5GHz (UNII
-1
)
Channel
Bandwidths - 20MHz and 40MHz channels in the 2.4GHz band;
20MHz, 40MHz, 80MHz channels in the 5GHz band
MIMO - 4x4
MCS - Supported values:
0-31 and 32 for 802.11n
0-9 for 802.11ac
-
Proprietary 10 -11 (1024QAM)
0-11 for 802.11ax
3 The values of the specific parameters of the FXS interface vary according to the standards adopted by the
country. The values in the FiberGateway FXS Interface Specifications table are configurable in the web
management interface in the Voice menu, item ConSIG Basic Settings, selecting the location (Country) where
FiberGateway will be used. See SIP section for details on this setup.