Altice Labs FGW GR140DG Wi-Fi 6, User Manual

Page: 13 / 101

13
Index of Tables
This User Manual is applicable to the equipment FiberGateway Altice
GR140DG with the FCC ID: 2ACJF-FGW-GR140DG
FCC NOTICE
This device complies with FCC part 15 rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference and
2. This device must accept any interference, including interference that may cause undesired operation
of the device
Caution:
Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
This device meets the FCC requirements for RF exposure in public or uncontrolled environments.
RF Exposure Statement
Note: This transmitter must not be co-located or operated in conjunction with any other antenna or
transmitter.
This equipment should be installed and operated with a minimum distance of
7
.
9
inches (2
0
cm)
between the radiator and your body.
This system has been evaluated for RF exposure for humans in reference to ANSI C 95.1 (American
National Standards Institute) limits.
The evaluation was based in accordance with FCC OET Bulletin 65C rev 01.01 in compliance with Part
2.1091 and Part 15.27.
The minimum separation distance from the antenna to general bystander is
7 . 9
inches (2
0
cm)
to maintain compliance.