Chapter 1: Nios II Hardware Development
1–23
Creating the Design Example
May 2011
Altera Corporation
Nios II Hardware Development Tutorial
5. Click the IRQ value for the
sys_clk_timer
component to select it.
6. Type
1
and press Enter to assign a new IRQ value.
shows the Qsys
System Contents
tab with the complete system.
Generate the Qsys System
You are now ready to generate the Qsys system. Perform the following steps:
1. Click the
Generation
tab.
2. Select
None
in both the
Create simulation model
and
Create testbench Qsys
system
lists. Because this tutorial does not cover the hardware simulation flow,
you can select these settings to shorten generation time.
3. Click
Generate
. The
Save changes?
dialog box appears, prompting you to save
your design.
Figure 1–12. System Contents Tab with Complete System