Technical data
© ALTENDORF 2007
2
2
Technical data
2.1
Machine identification
Fig. 2-1: Type label
The type label attached to the machine stand is
used to determine the machine identity and further
important key data.
Meaning of the specified designations
:
Test symbol
To document that the machine complies with the
basic health and safety requirements as defined in
Appendix I of Guideline 98/37/EWG for modifying
Guideline 89/392/EWG (Machine Guideline) the
machine is identified by the following test symbol:
CE symbol, GS symbol and wood dust test symbol
.
Typ:
Machine designation
Nummer:
Machine-specific identifica-
tion number
Baujahr:
Year when machine was
made
Sägeblatt min
Ø
Diameter of the smallest
permitted saw blade
Sägeblatt max
Ø
Diameter of the largest
permitted saw blade
Führungsschlitz-
breite des Spaltkeils:
Diameter of the guide pins
for the riving knife in the
riving knife holder
