Altec AIR, LLC
P210WLP Series Air Dryer User’s Guide
Page 12 of 91
P017455 – Rev. C
6.2 Before You Begin
6.2.1
Carefully inspect the unit, including the shipping box as well as the air
Dryer, for ANY DAMAGE CAUSED BY SHIPPING. If any shipping
damage is detected, it is important to file a claim with the shipping
company prior to continuing the installation procedures.
6.2.2
Read the entire
Installing Your Dryer
section to familiarize yourself with
the components and procedures before performing the air Dryer installation.
6.2.3
Verify the installation location of the air Dryer:
6.2.3.1
Well ventilated and free from abrasive dust or chemicals.
6.2.3.2
Ambient temperature is between 40° and 85° F (5° and 30° C) for
optimal performance
NOTE:
Higher temperatures will decrease component lifespan.
6.2.3.3
Meets the following power requirements:
•
110 - 125 VAC for P210WLP models
•
208 - 253 VAC, 1 Phase for P212WLP models
•
All models require 50/60 Hz and minimum 15 amp service with a 10
amp slow blow fuse
6.2.4
Notify the alarm center of the installation and potential for alarms during
the process (as necessary).
IMPORTANT!
Performing procedures not described in this User’s Guide or
installing components not supplied by Altec AIR is NOT
RECOMMENDED AND MAY VOID THE WARRANTY.
Summary of Contents for Puregas P210W2LP
Page 2: ......
