Alpinion Medical Systems X-CUBE 70 Quick Manual Download

Page: 25 / 125

Console Overview

Table 1-2 Key description

Control

Control Name

Description

SLEEP

Activate gleep mode.

User-Defined

Keys (U1–U6)

Access user-defined functions.

The function for each key can be assigned in

Utility

Setup

SystemPreset

User Setting

User Defined Key

Activate M mode.

Activate PW mode.

Activate CF mode.

Activate 2D mode.

Activate Continuous Wave (CW) Doppler mode. This

control is optional.

3D4D

Activate 3D or 4D mode.

Select

gelect the desired function from the context menu on the

screen.

Angle

Adjust the angle.

•

In 2D or Color mode, rotate to adjust the angle steer.

•

In CW or PW mode, rotate to adjust the Doppler angle

correct.

•

In Body Pattern mode, rotate to adjust the transducer

angle.

•

In Arrow mode, rotate to adjust the arrow angle.

•

In CW or PW mode, press to adjust the auto angle.

Clear

Delete the arrow, annotation, body patterns and

measurement results displayed on an image.

Depth

Adjust the scanning depth of an image.

Focus

Change location and number of focus on the area of

interest.

Zoom

Turn the Zoom mode on.

•

Rotate to activate Read zoom.

•

Press to activate Write zoom in Read zoom mode.

Summary of Contents for X-CUBE 70






























































































































Search results

Summary of Contents for X-CUBE 70

Reviews:

Related manuals for X-CUBE 70

Brands by name

Popular brands

Alpinion Medical Systems X-CUBE 70, Quick Manual

Search results

Summary of Contents for X-CUBE 70

Reviews:

Related manuals for X-CUBE 70

Brands by name

Popular brands