Measurement and Report
2-37
Basic Measurements
The basic measurements are available in the following imaging modes:
•
2D mode
•
M mode
•
Doppler mode
2D mode measurements
❚
Distance
1 Distance
1
1
Select
Distance
on the touch screen. The start point appears.
2
2
Use
[Trackball]
to move the marker to the start point.
3
3
Press the
[Set]
key to fix the point. The end point, overlapping the start point,
appears.
4
4
Use
[Trackball]
to move the marker to the end point, and press the
[Set]
key.
5
5
The measured value is fixed, and the distance (
D
) is shown on the
Result
window.
3 Lengths
1
1
Select
Distance
on the touch screen. The start point appears.
2
2
Draw three straight lines using
[Trackball]
, and press the
[Set]
key.
3
3
Move the fourth point, and then press the
[Set]
key.
4
4
The measured value is fixed, and three distances (
D1
,
D2
,
D3
) are shown on the
Result
window.
Trace Length
1
1
Select
Distance
on the touch screen. The start point appears.
2
2
Use
[Trackball]
to move the marker to the start point, and press the
[Set]
key.
The end point appears.
3
3
Move the end point gradually along the circumference of the target object using
[Trackball]
.
4
4
When the start point and the end point are connected with a line, press the
[Set]
key
to complete the measurement.
5
5
The measured value is fixed, and the distance (
D
) is shown on the
Result
window.
Summary of Contents for X-CUBE 70
Page 1: ...DIAGNOSTIC ULTRASOUND SYSTEM X CUBE 70 Quick Guide Rev 0 ENG D N 70003656 ...
Page 10: ......
Page 14: ......
Page 46: ......
