• Confirm whether the connected iPod/iPhone is supported by the unit if there is no sound output from it or the iPod/iPhone is not recognized
after connection.
• Do not leave an iPod/iPhone inside the vehicle for a prolonged period. Heat and moisture may damage the iPod/iPhone, so that it may not
be able to play.
USB Memory/MTP (Mobile Phone) Connection (sold separately)
This unit has front and rear USB terminals. You can connect a USB/MTP (mobile phone) to either terminal or both terminals. But it is not
allowed to connect two MTP (mobile phone) or other charging devices concurrently.
You need to use the supplied USB cable when connecting to the rear USB terminal.
Note
• Pull out USB Memory squarely from the USB cable.
• Remove the USB Memory and reconnect it if there is no sound output from it or the USB Memory is not recognized after connection.
• Keep the USB cable away from other cables.
Mounting the Microphone
For the sake of safety, mount the microphone at the following locations.
• At a stable and secure location.
• At a location that does not inhibit safely driving the vehicle.
• Mount the microphone at a location where the driver’s voice can easily be picked up.
Choose a location for the microphone that can easily pick up the driver’s voice. Requiring the driver to move towards the microphone for
audibility causes a distraction that could be dangerous.
Using the Rear AUX Input Connector
Connect the audio output terminal of the vehicle’s sound system directly to the AUX IN terminal behind the unit. Adaptive cable (RCA
extension cable or standard RCA cable to 3.5ø mini phono plug) should be purchased separately.
Pressing
, you can select AUX mode to listen to the music or navigation prompts played by the vehicle’s sound system.
Summary of Contents for UTX-A09
Page 46: ...Connections ...
