Alpine iDA-X311 User Manual Download | Manualshive

Page: 40 / 42

background image

38

-EN

<JAPANESE CAR>

iPod Connection (sold separately)

USB connection (iDA-X313 only)

Connect USB cable to an iPhone (iDA-X313 only)/iPod with
Interface cable for iPod.

Direct connection

Connect iPod direct connector to an iPod with FULL SPEED
connection cable (KCE-433iV).

Remove the iPod

Remove the iPod from FULL SPEED Connection Cable (or
Interface cable for iPod (iDA-X313 only)).

•

Remove the iPhone/iPod after the unit has been changed to a source
other than the iPhone/iPod. If the iPhone/iPod is removed while
playing, data may be lost.

•

If sound is not output or the iPhone/iPod is not recognized even when
the iPod is connected, remove the iPhone/iPod once, then connect it
again, or reset the iPod.

•

Do not leave the iPhone/iPod in a vehicle for a long time. Heat and
humidity may damage the iPhone/iPod and you may not be able to
play it again.

USB memory Connection (sold separately)

Connect USB memory

Connect the USB cable to the USB connector of the unit, and
then secure the connection using the lock case supplied with
USB cable as shown below.

Remove USB memory

Pull out USB memory squarely from the USB cable.

•

When removing USB memory, pull it out straight.

•

If sound is not output or USB memory is not recognized even when
USB memory is connected, remove USB memory once, then connect
it again.

•

Change to a source other than the USB memory mode, then remove
the USB memory. If the USB memory is removed in the USB memory
mode, data may be damaged.

•

Route the USB cable away from other cables.

Portable Audio Player Connection (sold separately,

iDA-X313 only)

Connecting a Portable audio player

Connect the cable supplied with a Portable audio player to
the USB cable.
Disconnect the Portable audio player.
Disconnect the cable supplied with the Portable audio
player from the USB cable.

•

Refer also to the Owner’s Manual of the Portable audio player.

Front Frame

Screws (M5 × 8)
(Included)

This unit

Mounting Bracket

Interface cable for iPod (supplied, iDA-X313 only)

USB cable

FULL SPEED

Connection Cable

(KCE-433iV) (supplied,

iDA-X311/iDA-X311RR only)

lock case

This unit

USB memory
(sold separately)

USB connector

Cable (supplied)

This unit

USB connector

USB memory
(sold separately)

Cable (supplied)

«
...
38
39
40
41
42
»

Summary of Contents for iDA-X311











































Reviews:

No comments

Related manuals for iDA-X311

T15 Mifare Reader Black

Brand: Gallagher Pages: 13

C-Tech HD 6600 SST

Brand: Clarke-tech Pages: 32

eXtreme HD mini

Brand: FTE Maximal Pages: 46

Brand: Blaupunkt Pages: 17

Brand: Cambridge Audio Pages: 27

Brand: Harman Kardon Pages: 15

Brand: Aria Pages: 12

Brand: RF Central Pages: 41

Brand: ST Group Pages: 61

Brand: Silicon Laboratories Pages: 2

Brand: Boss Audio Systems Pages: 13

Brand: Williams Sound Pages: 8

Brand: JTS Pages: 24

Brand: Audiovox Pages: 78

Brand: Strong Pages: 25

Accessibility Solution

Brand: Dolby Laboratories Pages: 2

Brand: Omega Pages: 38

Brand: Ten-Tec Pages: 23

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands