21
-EN
You can change the Bass Frequency emphasis to create your own tonal
preference.
Setting the Bass Level
Turn the
Double Action encoder
(iDA-X313 only) or
Rotary encoder
(iDA-X311/iDA-X311RR only) to select
the desired bass level (–7~+7), and then press
/
ENTER
.
You can emphasize or weaken the bass level.
•
The adjustment can also be made by pressing
IMPRINT
(iDA-X313
only) or
SOUND
(iDA-X311/iDA-X311RR only). Refer to “Adjusting
Setting the Bass Bandwidth
Turn the
Double Action encoder
(iDA-X313 only) or
Rotary encoder
(iDA-X311/iDA-X311RR only) to select
the desired bass bandwidth, and then press
/
ENTER
.
Changes the boosted bass bandwidth to wide or narrow. A wider
setting will boost a wide range of frequencies above and below
the centre frequency. A narrower setting will boost only
frequencies near the centre frequency.
Setting the Bass Centre Frequency
Turn the
Double Action encoder
(iDA-X313 only) or
Rotary encoder
(iDA-X311/iDA-X311RR only) to select
the desired bass centre frequency, and then press
/
ENTER
.
80 (Hz)
100 (Hz)
200 (Hz)
60 (Hz)
80 (Hz)
Emphasizes the displayed bass frequency ranges.
•
The function is inoperable when DEFEAT is set to ON.
You can change the Treble Frequency emphasis to create your own tonal
preference.
Setting the Treble Level
Turn the
Double Action encoder
(iDA-X313 only) or
Rotary encoder
(iDA-X311/iDA-X311RR only) to select
the desired treble level (–7~+7), and then press
/
ENTER
.
You can emphasize the treble level.
•
The adjustment can also be made by pressing
IMPRINT
(iDA-X313
only) or
SOUND
(iDA-X311/iDA-X311RR only). Refer to “Adjusting
Setting the Treble Centre Frequency
Turn the
Double Action encoder
(iDA-X313 only) or
Rotary encoder
(iDA-X311/iDA-X311RR only) to select
the desired treble centre frequency, and then press
/
ENTER
.
10.0 kHz
12.5 kHz
15.0 kHz
17.5 kHz
10.0 kHz
Emphasizes the displayed treble frequency ranges.
•
The function is inoperable when DEFEAT is set to ON.
The High Pass Filter on this unit can be adjusted to suit your personal
taste.
Turn the
Double Action encoder
(iDA-X313 only) or
Rotary encoder
(iDA-X311/iDA-X311RR only) to select
the desired HPF frequency, and then press
/
ENTER
.
OFF
80 (Hz)
120 (Hz)
160 (Hz)
•
The function is inoperable when DEFEAT is set to ON.
Operating the External Audio Processor
You can call up the preset memory of the external audio processor from
this unit.
1
Press and hold
PRESET
for at least 2 seconds to
call the external audio processor mode when the
external audio processor is connected.
The AP Preset screen is displayed.
2
Turn the
Double Action encoder
(iDA-X313 only)
or
Rotary encoder
(iDA-X311/iDA-X311RR only) to
select the preset number, and press
/
ENTER
.
•
For the operation of external audio processor, refer to the Owner’s
Manual of the external audio processor you purchased.
Setting the Bass Control
Setting the Treble Control
Adjusting the High Pass Filter
Summary of Contents for iDA-X311
Page 2: ......
