Alpine iDA-X311 User Manual Download

Page: 35 / 42

-EN

The sound is not output from the speakers.

• Unit has no output signal of the internal amplifier.

- POWER IC is switched to “ON” (page 24).

iPod does not play and no sound is output.

• The iPod has not been recognized.

- Reset this unit and the iPod. Refer to “Initial System Start-Up”

(page 6). To reset the iPod, refer to the Owner’s Manual of the
iPod.

• Abnormal current is being drawn by the device connected to

USB. An error message may be displayed if the device
connected is not compatible or defective.
- Attempt to connect another iPhone/iPod.

• An iPod that is not supported by the unit is connected.

- Connect an iPod that is supported by the unit.

• An iPhone/iPod is not connected.

- Make sure the iPhone/iPod is correctly connected and the cable

is not excessively bent.

• There are no songs in the iPhone/iPod.

- Download songs to the iPhone/iPod and connect to this unit.

• Text information that is no supported on the unit has been input.

- Use an iPhone/iPod in which text information is input that is

supported on the unit.

• Communication error.

- Turn the ignition key off, and then set to ON again.
- Reset the iPod.
- Verify in the display after reconnecting the iPhone/iPod to the

Interface cable for iPod and to the USB cable.

• Caused by the iPhone/iPod Software Version not being

compatible with this unit.
- Update the iPhone/iPod Software Version to be compatible

with this unit.

• The iPod is not verified.

- Try another iPod.

• The iPod is not connected.

- Make sure the iPod is correctly connected (refer to

“Connections”).

Make sure the cable is not bent excessively.

• There are no songs in the iPod.

- Download songs to the iPod and connect to this unit.

• Communication error.

- Turn the ignition key off, and then set to ON again.
- Reset the iPod.
- Check the display by reconnecting between the iPod and this

unit using the FULL SPEED Connection Cable (KCE-433iV).

• Caused by the iPod Software Version not being compatible with

this unit.
- Update the iPod Software Version to be compatible with this unit.

• Abnormal current is run to the USB connector device (an error

message may be displayed if the USB device that is not
compatible with the unit is connected).

USB memory is a malfunction or it is shorted.
- Connect another USB Flash Memory device.

• A USB device that is not supported by the unit is connected.

- Connect a USB device that is supported by the unit.

• A USB memory is not connected.

- Make sure the USB memory device is correctly connected and

the cable is not excessively bent.

Audio

iPod

Indication for iPod Mode

(USB connection), (iDA-X313 only)

CURRENT
ERROR

DEVICE
ERROR

NO USB
DEVICE

NO SUPPORT

Indication for iPod Mode

(Direct Connection), (iDA-X311/

iDA-X311RR only)

Indication for USB memory

CURRENT
ERROR

DEVICE
ERROR

NO USB
DEVICE

Summary of Contents for iDA-X311











































Search results

Summary of Contents for iDA-X311

Reviews:

Related manuals for iDA-X311

Brands by name

Popular brands

Alpine iDA-X311, User Manual

Search results

Summary of Contents for iDA-X311

Reviews:

Related manuals for iDA-X311

Brands by name

Popular brands