23
-EN
•
The
button can be used only when an optional BLUETOOTH
INTERFACE (KCE-400BT) is connected.
•
If the mobile phone compatible with the Voice Dial function is
connected, the Voice Dial function can be used.
•
When INT MUTE is set to ON, the BLUETOOTH setting cannot be
made. When the BLUETOOTH INTERFACE (KCE-400BT) is
connected, set INT MUTE to OFF. Refer to “Turning Mute Mode On/
Off (INT MUTE)” (page 23).
Setting the BLUETOOTH Connection
AUDIO is selected on the setup menu in step 2.
Operating the External Audio Processor (USER PRESET)
Turn the
Double Action encoder
(iDA-X313 only) or
Rotary encoder
(iDA-X311/iDA-X311RR only) to select the desired preset number, and
then press
/ENTER
.
In normal mode, you can also call up the preset memory of the external
audio processor by pressing and holding “PRESET” for at least 2
seconds. Refer to “Operating the External Audio Processor” on page 21.
•
For the operation of external audio processor, refer to the Owner’s
Manual of the external audio processor you purchased.
Turning Media Xpander ON/OFF
When the Media Xpander is on, and external audio processor is
connected, you can adjust the Media Xpander level.
Setting the MX Level
MX (Media Xpander) makes vocals or instruments sound distinct
regardless of the music source. The FM radio, CD, USB memory and
iPhone (iDA-X313 only)/iPod, will be able to reproduce the music
clearly even in cars with a lot of road noise. The initial setting is
different depending on the source.
Subwoofer On and Off
The adjustment can also be made by pressing and holding IMPRINT*
(iDA-X313 only) or SOUND (iDA-X311/iDA-X311RR only) for at
least 2 seconds. Refer to “Turning Subwoofer ON/OFF” (page 20).
* For iDA-X313, when connecting IMPRINT audio processor, you
can’t turn the subwoofer ON or OFF by pressing IMPRINT.
GENERAL is selected on the setup main menu in step 2.
Connecting an MP3 Changer (PLAY MODE)
Perform this setting when connecting MP3 changer. MP3 changer can
playback CDs containing both CD and MP3 data. However, in some
situations (some enhanced CDs), playback may be difficult. For these
special cases, you can select playback of CD data only. When a disc
contains both CD or the MP3 data, playback starts from the CD data
portion of the disc.
•
Change discs after performing this setting.
Sound (Beep) Guide Function (iDA-X313 only)
This function will give audible feedback with varying tones depending
upon the button pressed.
Turning Mute Mode On/Off (INT MUTE)
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.
•
When BLUETOOTH is set to ADPT, INT MUTE cannot be set. Refer
to “Setting the BLUETOOTH Connection” (page 23).
•
When the BLUETOOTH INTERFACE (KCE-400BT) is connected,
set INT MUTE to OFF.
Setting the AUX+ Mode
You can input the audio of a connected external device, (such as a
portable player) to the Full Speed connector (iDA-X311/iDA-X311RR
only)/BLUETOOTH interface connector (iDA-X313 only) of this unit,
using a conversion cable (KCE-237B) (optional) for building up the
AUX IN.
An external device and an iPod (iDA-X311/iDA-X311RR only)/
BLUETOOTH INTERFACE (KCE-400BT) cannot be connected at the
same time.
Setting the AUX+ NAME Mode
You can change the AUX+ NAME when AUX+ is ON.
Setting the AUX Mode (V-Link)
You can input TV/video sound by connecting an optional Ai-NET/RCA
Interface cable (KCA-121B) or Versatile Link Terminal (KCA-410C) to
this component.
You can change the AUX NAME display when AUX is set to ON. Press
/ENTER
when AUX is set to ON, and select AUX NAME by
turning the
Double Action encoder
(iDA-X313 only) or
Rotary
encoder
(iDA-X311/iDA-X311RR only), then press
/ENTER
.
After that, turn the
Double Action encoder
(iDA-X313 only) or
Rotary
encoder
(iDA-X311/iDA-X311RR only) to select the desired AUX
name.
If the KCA-410C is connected, it is possible to select two AUX names.
•
Via KCA-410C, up to 2 external devices with RCA output can be
connected. In this case, press
SOURCE
to select AUX mode and
then press
BAND/ TA
to select your desired device.
BT IN ADPT / BT IN OFF (Initial Setting)
Audio Setting (Only when external audio
processor is connected)
PRE-1 (Initial Setting) / PRE-2 / PRE-3 / PRE-4 / PRE-5 / PRE-6
OFF (Initial setting) / ON
NON EFFECT / LEVEL 1 / LEVEL 2 / LEVEL 3
SUBW ON (Initial setting) / SUBW OFF
General Setting
CD-DA (Initial setting) / CD-DA&MP3
CD-DA :
Only CD data can be played back.
CD-DA&MP3 :
Both CD data and MP3 file tracks can be played
back.
BEEP ON (Initial setting) / BEEP OFF
INT MUTE ON / INT MUTE OFF (Initial setting)
AUX+ ON / AUX+ OFF (Initial setting)
AUX+ ON :
Set to ON when an external device is connected. If
SOURCE
is pressed and AUX+ is selected, the
sound of the external device is input to the unit.
AUX+ OFF :
Set to OFF when an iPod (iDA-X311/iDA-X311RR
only) is connected. When set to OFF, AUX+ source
cannot be selected.
AUX (Initial setting) / TV / DVD / PORTABLE / GAME
AUX ON / AUX OFF (Initial setting)
Summary of Contents for iDA-X311
Page 2: ......
