manualshive.com logo in svg

Alpine iDA-X311, User Manual

Share
Download
Alpine iDA-X311 User Manual Download Page 36

34

-EN

 

• No song (file) is stored in the USB memory.

- Connect the USB memory device after storing songs (files).

• A sampling rate/bit rate not supported by the unit is used.

- Use a sampling rate/bit rate that is supported by the unit.

• A copy-protected WMA file was played back.

- You can only play back non-copy-protected files. 

• Text information that is not recognizable by the unit has been 

input.
- Use a USB memory device with input text information that is 

supported by the unit.

• Abnormal current is being drawn by the device connected to 

USB. An error message may be displayed if the device 
connected is not compatible. The USB Flash Memory device 
may be defective.
- Attempt to connect another Portable audio player.

• A Portable audio player that is not supported by the unit is 

connected.
- Attempt to connect another Portable audio player.

• A Portable audio player is not connected.

- Make sure the Portable audio player is correctly connected and 

the cable is not excessively bent. 

• There are no songs in the Portable audio player.

- Download songs to the Portable audio player and connect to 

this unit.

• Text information that is no supported on the unit has been input.

- Use a Portable audio player in which text information is input 

that is supported on the unit.

• Communication error.

- Turn the ignition key off, and then set to ON again.
- Verify in the display after reconnecting the Portable audio 

player to the connection cable.

• Caused by the Software Version not being compatible with this 

unit.
- Update the Portable audio player Software Version.

• The Portable audio player is not verified.

- Change another Portable audio player.

• Protective circuit is activated due to high temperature.

- The indication will disappear when the temperature returns to 

normal operating range.

• Malfunction in the CD Changer.

- Consult your Alpine dealer. Press the magazine eject button and 

pull out the magazine. 

 

Check the indication. Insert the magazine again. 

 

If the magazine cannot be pulled out, consult your Alpine 
dealer.

• Magazine ejection not possible.

- Press the magazine eject button. If the magazine does not eject, 

consult your Alpine dealer.

• A disc is left inside the CD Changer.

- Press the eject button to activate the eject function. When the 

CD Changer finishes the eject function, insert an empty CD 
magazine into the CD Changer to receive the disc left inside 
the CD Changer.

• No magazine is loaded into the CD Changer.

- Insert a magazine.

• No indicated disc.

- Choose another disc.

Indication for Portable audio player Mode 
(iDA-X313 only)

UNSUPORT

NO SUPPORT

CURRENT 
       ERROR

DEVICE 
       ERROR

NO USB 
     DEVICE

NO SONG

NO SUPPORT

Indication for CD Changer

HI-TEMP

NO 
MAGAZINE

Summary of Contents for iDA-X311











































Reviews:

No comments

Brands by name

Popular brands

Load more brands