9
We reserve the right to modify technical specifications without prior notice.
UK830510/191106
© Alpha-InnoTec GmbH
Installation and assembly
observe the following when performing all work:
notICe.
always comply with applicable accident
prevention regulations, statutory regula-
tions, ordinances and directives.
WarnIng!
the heat pump or heat pump system may
be installed and assembled only by a quali-
fied technician!
notICe.
observe the sound levels of the respective
model.
overview “Technical data / scope of delivery”,
“Sound” section.
installation loCation
CautIon.
Install the unit only indoors.
The installation area must be frost-free and dry. It must
meet the requirements of dIN eN 378. It must also fulfill
applicable local regulations.
dimensional drawing and installation plan for re-
spective model.
transport to installation loCation
To prevent damage during transport, always transport
the unit to final installation location in its original packag-
ing, using a lifting truck.
notICe.
you can underpin the LW 330(L) using a
lifting truck; transport the LW 250(L) and
LW 320H(L) on the wooden pallet.
lW 330(l)
If it is not possible to transport the unit to the final instal-
lation location using a lifting truck, you can also transport
the lW 250(l) and lW320H(l) heat pumps using a hand
truck (not applicable for the lW 300(l)).
lifting the unit with pipes
Danger!
several people are required to transport
the unit. Do not underestimate the weight
of the unit.
overview “Technical data / scope of delivery”,
“General unit data” section.
Danger!
Danger of tipping over during transport!
(LW 250(L) and LW 320H(L) are not fas-
tened to the wooden pallet!). this can re-
sult in personal injury and damage to the
unit.
– take suitable precautionary measures
to eliminate the danger of tipping.
Danger!
Make sure to secure unit against slipping
during transport.
CautIon.
never use components and hydraulic con-
nections on the unit for purposes of trans-
port.
