5
We reserve the right to modify technical specifications without prior notice.
UK830510/191106
© Alpha-InnoTec GmbH
CautIon.
Install the heat pump only indoors and
operate only with outside air as the heat
source. the air ducts must discharge into
the open air. Do not restrict or block the
air ducts.
dimensional drawing and installation plan for re-
spective model.
WarnIng!
switch on unit only if air ducts are mount-
ed on the unit.
take measures on the fan side to pre-
vent injuries from the rotating fan (above-
ground air duct discharge: below-ground
air-channel discharge: wire mesh grille –
accessories not included in scope of deliv-
ery).
WarnIng!
the integration of the heat pump in venti-
lation systems is not permissible. the use
of the cooled air for cooling purposes is
not permitted.
WarnIng!
In the air outlet area the air temperature
is ca. 5 K below the ambient temperature.
under certain climatic conditions, there-
fore, an ice layer can form in the air out-
let area. Install the heat pump so that the
air blower does not blow in the direction
of footpaths.
Customer services
for technical information please contact a qualified tech-
nician or the manufacturer's local partner.
overview “customer service”.
warranty
/
Guarantee
for warranty and guarantee conditions, please refer to
the purchase documents.
notICe.
please contact your dealer concerning
warranties and guarantees.
waste disposal
When decommissioning the unit, always comply with ap-
plicable laws, directives and standards for the recovery,
recycling and disposal of materials and components of
cooling units.
"dismantling".
