10
Angle valve
1.Turn on the angle valve slowly
Check the threaded connections at each end of the supply hose for leaks. If leaks
are found, shut off water, and re-connect the hose ensuring the o-rings are in place.
Add teflon tape if needed. Once leak-free, open the angle valve completely.
Preparation
3.
Self-inspection startup sequence
1. Once power is connected, the seat should beep. The side knob light will turn on,
and the self-inspection startup sequence will start.
2. When the seat beeps again, the startup sequence is complete.
3. The UXT Pearl is now ready to use!
2. Power connection
Indicator light
Reset switch
Current detection
test button
Plug the electrical cord into a GFCI 3 prong outlet. Press the reset switch button to
activate. The indicator light should turn on, indicating that the power is on.
TEST BEFORE EACH USE
1. PLUG INTO RECEPTACLE
2. PRESS RESET BUTTON:
VISUAL INDICATOR
APPEARS.
3. PRESS TEST BUTTON:
VISUAL INDICATOR DISAPPEARS.
4. PRESS RESET FOR USE.
D
O
NOT USE IF
ABOVE TEST FAILS.
WARNING:
Summary of Contents for UX-T Pearl
Page 1: ...UXT Pearl...
Page 20: ......
