background image

READ ALL INSTRUCTIONS BEFORE USING

IMPORTANT SAFEGUARDS

When using electrical products, especially when children are present, basic safety 

precautions should always be followed, including the following:

1. The appliance is not to be used by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction.

2. This appliance can be used by children aged from 8 years and above and persons

with reduced physical, sensory or mental capabilities or lack of experience and

knowledge if they have been given supervision or instruction concerning use of the

appliance in a safe way and understand the hazards involved.

3. Children shall not play with the appliance.

4. Cleaning and user maintenance shall not be made by children without supervision.

DANGER 

  

 

–To reduce the risk of electrocution:

WARNING

 

To reduce the risk of burns, electrocution, fire, or injury to persons.

1. Close supervision is necessary when this product is used by, on, or near children or

individuals with disabilities.

2. Use this product only for its intended use as described in this manual. Do not use

attachments not recommended by the manufacturer.

3. Never operate this product if it has a damaged cord or plug, if it is not working

properly, if it has been dropped or damaged, or dropped into water. Return the

product to a service center for examination and repair.

4. Keep the cord away from heated surfaces.

5. Never use while sleeping or drowsy.

6. Never drop or insert any object into any opening or hose.

7. Do not use outdoors or operate where aerosol (spray) products are being used or

where oxygen is being administered.

8. Connect this product to a properly grounded outlet only. See Grounding

Instructions.

9. Do not throw cigarettes and other burning materials into toilet, otherwise it might

cause fire.

10. This product is an electric appliance, so it must be placed far away from water and

other liquid.

11. Do not lay the product on its side or upside down during the electrical circuit.

12. It is prohibited to use other electric appliances in the same socket.

13. It is forbidden to use the power extension or unstable loose outlet.

14.Do not reuse any existing water supply hoses, otherwise it might cause leakage,

fire or electrical shock. Installation should include specified components and a new

water supply hose.

1. Do not use while bathing.

2. Do not place or store product where it can fall or be pulled into a tub or sink.

3. Do not place in or drop into water or other liquid.

4. Do not reach for a product that has fallen into water. Unplug immediately.

5. Do not wash the main unit or electrical plug with water or detergent.

6. Do not handle the electrical plug with wet hands.

7. Never block the outlet of the air dryer.

8. Never disassemble, repair or modify this product.

9. During installation, disassembly, repair and maintenance of the product, the

power plug must be switched off and water supply be shut off.

0

1

Summary of Contents for UX-T Pearl





















Reviews: