16
Side control knob functions
When Nobody is Seated
•
Press the knob in to flush the toilet
•
Turn the knob clockwise to bring the nozzle out for manual cleaning
•
Press the knob in and hold for 3 seconds to turn off the LED ring light. Repeat to
turn it back on.
•
Press the knob in and hold for 6 seconds to turn the toilet off. Repeat to turn it
back on.
When Seated, but Idle
•
Press the knob in to flush the toilet
•
Turn the knob clockwise to start a FRONT wash or counterclockwise to start
a REAR wash.
During an Active Wash Cycle
•
Press the knob in to STOP the active function
•
Turn the knob clockwise to move the nozzle position forward or counterclockwise
to move the nozzle position backward.
•
By default, turning the knob during an active wash cycle will change the nozzle
position. Press and hold the knob in for 3 seconds during a wash to switch to
spray pressure adjustment mode. Press and hold the knob in for 3 seconds again
to switch back to nozzle position adjustment mode.
During an Active Drying Cycle
•
Press the knob in to STOP the active function
•
Turn the knob clockwise to increase the drying temperature or counterclockwise
to decrease the drying temperature.
Summary of Contents for UX-T Pearl
Page 1: ...UXT Pearl...
Page 20: ......
