18
Chapter 4:
System Network
.
Step 2: RAID Creation
Next, administrators can configure their preferred RAID setting and build their
RAID volume. You can access RAID settings from the menu bar of the Web
Administration Interface by navigating to Storage Management > RAID
Management.
For more information on configuring RAID, see
Chapter 4: Storage >
RAID Management
.
Don’t know which RAID level to use? Find out more about the different RAID levels
from
Appendix
B
: RAID Basics
.
Step 3: Create Local Users or Setup Authentication
Once the RAID is ready, you can begin to create local users for ALLNET IP storage,
or choose to setup authentication protocols such as Active Directory (AD).
For more on managing users, go to Chapter 4:
User and Group Authentication.
For more information on configuring Active Directory, see
Chapter 4: User and Group Authentication >
ADS
Support
.
For information about the benefits of Active Directory, see
Appendix C: Active
Directory Basics
.
Step 4: Create Folders and Set Up ACLs
Once users are introduced into your network, you can begin to create various
folders on the ALLNET IP storage and control user access to each using Folder
Access Control Lists.
More information on managing folders, see
Chapter 4: Storage Management >
Share Folder
.
To find out about configuring Folder Access Control Lists, see Chapter 4: Storage
Management > Share Folder>
Folder Access Control List (ACL)
.
Step 5: Start Services
Finally, you can start to setup the different services of ALLNET IP storage for the
users on your network. You can find out more about each of these services by
clicking below:
SMB/CIFS
Apple File Protocol (AFP)
Network File System (NFS)
File Transfer Protocol (FTP)
iTunes Server
Printer Server
