100
Full Backup
The “Full backup” will have all shares from source backup to
destination. It could also create shares automatically from
destination if it is not existed. This is only apply if the target
server is same model as source.
Custom Backup
The “Custom backup” is allowed user to choose desired
shares backup to destination.
iSCSI Backup
The “iSCSI backup” can backup iSCSI volume as single file
to destination.
Full Backup
Click on full back and setup screen appear as below. Fill in the remote target IP
(Destination) and port (no need to change only if this port has been used).
If encryption is required then enable it. Please be sure the associated target server
is also has encryption enabled.
Carry on inputting valid remote target server account name and password. The
earlier section has introduced ‘Remote Target Server” and here are fields to fill in.
After setting completed, please click on “Connection Test”. The source unit will try
to connect with associated target system. If connection can be built up successful
then “Connection passed” will be prompted or “Failed” will appear.
Click “Next” and more setting is appeared.
