12
Chapter 2: Hardware Installation
Overview
Your ALLNET IP storage is designed for easy installation. To help you get started,
the following chapter will help you quickly get your ALLNET IP storage up and
running. Please read it carefully to prevent damaging your unit during installation.
Before You Begin
Before you begin, be sure to take the following precautions:
1.
Read and understand the Safety Warnings outlined in the beginning of the
manual.
2.
If possible, wear an anti-static wrist strap during installation to prevent
static discharge from damaging the sensitive electronic components on the
ALLNET IP storage.
3.
Be careful not to use magnetized screwdrivers around the ALLNET IP
storage’s electronic components.
Cable Connections
To connect the ALLNET IP storage product to your network, follow the steps below:
1.
Connect an Ethernet cable from your network to the WAN/LAN1 port on the
back panel of the ALLNET IP storage.
ALL-NAS1000 WAN/LAN1 port
2.
Connect the provided power cord into the universal power socket on the
back panel. Plug the other end of the cord into a surge protector socket.
ALL-NAS1000 power socket
