Allied Construction Products, LLC www.alliedcp.com
TM103349_SP1000B_15sep
25
12.0 Dimension Diagrams – Skid-Pac
12.6 Hydraulic Motor Options
Three motor options are available.
Table 12.2 Motor Identification
Motor
Option
Flow
gpm [lpm]
“L” -
Length
Inch [mm]
Part
Number
Refer to
Table 13.5
1
12 [45]
3-13/16
[97]
2 18
[68]
4-1/2
[114]
3
21 [79]
4-3/4
[121]
12.6.1 Motor Identification
When the part number of the motor is not known,
measure the length of the motor’s body, as shown in
Figure 12-5.
Fig. 12-5 Side View of Motor - Measure Body “L”
Start from the back edge of the body and measure up
to but not including the mounting flange. (Do not
include bolt heads in your measurement). Compare
your measurement with the dimensions in Table 12.2.
IMPORTANT
The motor is assembled for clockwise rotation.
Pressurizing the outlet port will damage the motor’s
internal components. Verify correct installation
before pressurizing the hydraulic circuit.
12.7 Motor and Valve Combination
IMPORTANT
Incorrect motor and valve combination will result in
poor performance or damage. Always identify which
motor and valve package option is installed if Skid-
Pac is moved to a different carrier or anytime the
motor or valve is replaced.
The Skid-Pac is standard equipped with a multi-
function control valve. Benefits of this valve include
optimized operation and reliability of critical
components such as the motor and bearings.
As previously stated, there are three motor options
available. For each motor there is a matching control
valve.
Fig. 12-6 Skid-Pac 1000 & 1000B General Dimensions
Summary of Contents for Skid-Pac 1000
Page 43: ...TM103349_SP1000B_15sep Notes ...
Page 44: ...TM103349_SP1000B_15sep R ...