Allied H12E, Service Manual, Page: 107 / 121

Repairs
4 - 32
14. Apply 1/8” bead of RTV sealant (e.g., Loctite 593
RTV) to the bearing cover. Reinstall bearing, shim
pack, and cover plate. Torque capscrews to 66 ft-lbs
(90 N-m).
16. Install the hydraulic motor. Torque capscrews to 280
ft-lbs (380 N-m).
15. Install new O-ring on brake.
15.1 Install brake to reducer.
15.2 Install manifold bracket to brake.
15.3 Torque 3/4” hardware to 280 ft-lbs (380 N-m). Torque
M12 hardware to 66 ft-lbs (90 N-m).
13. Apply bead of anaerobic sealant (e.g., Loctite 515) to
the RH cover plate. Reinstall RH cover plate. Torque
capscrews to 165 ft-lbs (225 N-m).
Studs
Brake Assembly
Manifold Bracket
Install O-Ring
Here
O-Ring
VIEW A
17. Install the motor support in frame.
- Motor Shaft Assembly & Installation