9.6 Angle Of Operation
(Refer to Figure 9-2.)
Always place the demolition tool at right
angles to the surface of the material. If not
placed at right angles, the hammer will
wear more quickly, leading to permanent
damage.
9.7 Hammer Rocking
(Refer to Figure 9-3.)
The hammer may be gently rocked back-
ward and forward at a maximum of 5o to al-
low dust to escape which would otherwise
dampen the impact power of the demoli-
tion tool. Do not rock the hammer at angles
greater than 5o or bending strain will occur
damaging the demolition tool and the
Street Hammer.
9.8 Incorrect Use of the Hydraulic
Hammer
Carefully read through this section. The
following paragraphs describe functions
that damage the Street Hammer or cause
personal injury.
9.8.1 Never Use as a Crowbar
(Refer to Figure 9-4.)
Using the Street Hammer as a crowbar
may cause the demolition tool to break.
6-1-03
9-3
A
LLIED
Street Hammer
AS Series
Figure 9-2. Angle Of Operation
Figure 9-3. Rocking The Hammer
Figure 9-4. Never Use Street Hammer As A
Crowbar
Summary of Contents for AS 342
Page 9: ...6 1 03 1 1 ALLIED Street Hammer AS Series ...
Page 61: ...ALLIED Street Hammer AS Series ...
Page 62: ......