Guppy PRO Technical Manual
V4.1.2
70
Error conditions
Blink codes are used to signal warnings or error states (When S1 and S2 blink
together, you see blinking orange):
•
S1 means green half of LED
•
S2 means red half of LED
•
Example: LLC not ready
S1 (3 blinks) + S2 (5 blinks): 3 orange blinks and
afterwards 2 red blinks
Video mode error: These are error modes according IIDC specification:
Vmode_Error_Status register (wrong settings of video mode, format, frame
rate and ISO settings).
Format 7 error: see Format 7 register description of IIDC specification.
Error Code
S1
Error Class
S2
1 blink
2 blinks 3 blinks
4 blinks
5 blinks
6 blinks
7 blinks
1 blink
Video
mode
error
Format 7
error 1
Format 7
error 2
2 blinks
Camera
class
object
Camera
regconst
object
Register
mapping
Unknown
FPGA type
ID
3 blinks
FLASH
class
object
Platform
class
object
Platform
initialization
Platform
firmware
set
Platform
LLC
version
4 blinks
FPGA
boot S1
error
FPGA
boot S2
error
FPGA boot
S3 error
FPGA
boot S4
error
FPGA
boot S5
error
FPGA
version
not
supported
5 blinks
Stack
setup
error
Stack
start
error
LLC not
ready
6 blinks
7 blinks
8 blinks
No valid
firmware
set
available
Table 22: Error codes
