Guppy PRO Technical Manual
V4.1.2
69
Status LEDs
There is one bicolor LED: showing green or orange (If half
green
and half
red
is
on you see an
orange
color).
RED
means: red half of LED permanent on
+RED pulsing
means: red half of LED is switched on for a short time. If the red
LED is already on, the LED will be switched off.
GREEN
means: green half of LED permanent on
+GREEN pulsing
means: green half of LED is switched on for a short time. If the
green LED is already on, the LED will be switched off.
Normal conditions
Figure 27: Position of status LED (example showing green half of LED on)
Event
(GREEN)
(RED)
Camera startup
During startup all LEDs are switched on
consecutively to show the startup progress:
(GREEN
+
RED)
long time
then
(GREEN
+
RED)
short time
then
GREEN
permanent on
Power on
GREEN
Bus reset
not available
Asynchronous traffic
+GREEN pulsing
Isochronous traffic
+GREEN pulsing
Waiting for external trigger
GREEN
RED
External trigger event
GREEN
+RED pulsing
Table 21: LEDs showing normal conditions
1 status LED bicolor
