Guppy PRO Technical Manual
V4.1.2
164
Autofunction AOI
Use this feature to select the image area (work area) on which the following
autofunctions work:
•
Auto shutter
•
Auto gain
•
Auto white balance
In the following screenshot you can see an example of the autofunction AOI.
As a reference it uses a grid of up to 65534 sample points equally spread over
the AOI.
Figure 72: Example of autofunction AOI (Show work area is on)
Note
Autofunction AOI is independent from Format_7 AOI settings.
If you switch off autofunction AOI, work area position and work
area size follow the current active image size.
To switch off autofunctions, carry out following actions in the
order shown:
1. Uncheck
Show AOI
check box (SmartView Ctrl2 tab).
2. Uncheck
Enable
check box (SmartView Ctrl2 tab).
Switch off Auto modes (e.g. Shutter and/or Gain) (SmartView
Ctrl2 tab).
Note
Configuration
To configure this feature in an advanced register see
Work area
