Allied Vision Guppy PRO Technical Manual Download Page 240

Page: 240 / 254

Guppy PRO Technical Manual

V4.1.2

240

Write the desired ProfileID with the SetDefaultID flag set.

Read back the register and check the ErrorCode field.

Error codes

Reset of error codes

The ErrorCode field is set to zero on the next write access.

You may also reset the ErrorCode

•

by writing to the USER_PROFILE register with the SaveProfile,
RestoreProfile and SetDefaultID flag not set.

•

by writing 00000000h to the USER_PROFILE register.

Stored settings

The following table shows the settings stored inside a profile:

ErrorCode #

Description

0x00

No error

0x01

Profile data corrupted

0x02

Camera not idle during restore operation

0x03

Feature not available (feature not present)

0x04

Profile does not exist

0x05

ProfileID out of range

0x06

Restoring the default profile failed

0x07

Loading LUT data failed

0x08

Storing LUT data failed

Table 147: User profiles: Error codes

Summary of Contents for Guppy PRO































































































































































































































































Search results

Summary of Contents for Guppy PRO

Reviews:

Related manuals for Guppy PRO

Brands by name

Popular brands

Allied Vision Guppy PRO, Technical Manual

Search results

Summary of Contents for Guppy PRO

Reviews:

Related manuals for Guppy PRO

Brands by name

Popular brands