Allied Vision Goldeye G, Technical Manual

Page: 78 / 136

72 Goldeye G Technical Manual V 2.0.0
Camera interfaces
FrameTriggerReady Active when the camera is in a state that accepts the
next frame trigger.
FrameTrigger Active when an image has been initiated to start. This
is a camera ‐ internal logic trigger, which is initiated by
an external trigger or software trigger event.
Exposing Active for the duration of sensor exposure.
FrameReadout Active during frame readout, i.e., the transferring of
image data from the CCD to camera memory.
Imaging High when the camera image sensor is either exposing
and/or reading out data.
Acquiring Active during an acquisition stream.
SyncIn1 Active when there is an external trigger at SyncIn1.
SyncIn2 Active when there is an external trigger at SyncIn2.
Strobe1 The output signal is controlled according to Strobe1
settings.
Figure 26: Goldeye G signals output block diagram
Signal Description
Table 39: Goldeye G output signals (continued)