Allied Vision Goldeye G, Technical Manual

Page: 69 / 136

Camera interfaces
63 Goldeye G Technical Manual V 2.0.0
I/O connectors and pin assignment
Connectors
I/O types
Non ‐ isolated I/Os:
• One non ‐ isolated line ‐ in (3.3 V LVTTL, 5 V TTL tolerated, see Table 30 on
page 64 )
• One non ‐ isolated line ‐ out (5 V TTL)
Opto ‐ isolated I/Os:
• One opto ‐ isolated line ‐ in
• Two opto ‐ isolated line ‐ out
• Maximum isolated power voltage is 30 V
• Line ‐ in voltages:
• V
in
(low) = 0.0 V to 1.0 V
• V
in
(high) = 3.0 V to 24.0 V
Caution:
Avoid
electrostatic discharge.
Electrostatic sensitive device.
To prevent equipment damage, use proper grounding techniques.
Avoid electromagnetic interferences.
For all power and interface connections use only shielded cables.
Camera Connectors Usage
Goldeye G ‐ 008 Hirose 12 ‐ pin External power and I/O
Goldeye G ‐ 032 Hirose 12 ‐ pin External power and I/O
Goldeye G ‐ 032 Cool Hirose 12 ‐ pin
Hirose 4 ‐ pin
I/O
External power
Goldeye G ‐ 033 Hirose 12 ‐ pin External power and I/O
Table 28: Connectors used for external power and I/O control