Allied Telesis MIB Structure (SIP/MGCP/NCS), Reference Manual

Page: 56 / 80

Chapter 16 - sntpGroup Parameters MIB Reference Manual - Provisioning MIB
VP500 Communication Unit 46
sntpDhcpGroup
Parameters
The following parameters allow you to set DHCP information for the
VP500 communication unit
sntpTimeZone-
ConfigGroup
Parameters
The following parameters allow you to set TIme Zone parameters for
the VP500 communication unit
Table 52: DHCP SNTP Parameters
Name Access Description Dynamic
sntpDhcpVendorCodeSpecific R/W DHCP SNTP server vendor specific code.
Default Value: 208
Yes
sntpDhcpHost R-O SNTP servers IP address or domain name provided by DHCP
server.
Default Value: 192.168.0.10
No
sntpDhcpPort R-O SNTP server IP port number provided by DHCP server.
Default Value: 123
No
Table 53: SNTP Time Zone Parameters
Name Access Description Dynamic
sntpTimeZoneUseTimeZoneSelection R/W Enable the use of pre-configured time zone selection available.
0 = Use custom time zone configuration
1 = Use pre-configured time zone selection
Default Value: 1
Yes
sntpTimeZoneTimeZoneSelection R/W Pre-configured time zone selection. NOTE: The clock is
automatically adjusted for daylight saving time changes if
applicable.
0 = Pacific Time (Canada & US) (GMT - 8h)
1 = Mountain Time (Canada & US) (GMT - 7h)
2 = Central Time (Canada & US) (GMT - 6h)
3 = Eastern Time (Canada & US) (GMT - 5h)
4 = Atlantic Time (Canada) (GMT - 4h)
5 = GMT Standard Time
6 = W. Europe Standard Time (GMT + 1h)
7 = China Standard Time (GMT + 8h)
8 = Tokyo Standard Time (GMT + 9h)
9 = Central Australia Standard Time (GMT + 9h30)
10 = Australia Eastern Standard Time (GMT + 10h)
Default Value: 1
Yes
sntpTimeZoneCustomTimeZoneConfiguration R/W Custom time zone configuration POSIX strings.
Default Value: EST5DST4,M4.1.0/02:00:00,M10.5.0/02:00:00
Yes