Allied Telesis MIB Structure (SIP/MGCP/NCS), Reference Manual

Page: 17 / 80

VP500 Communication Unit 7
2
InterfaceGroup Parameters
The Interface parameters allow you to set information pertaining to the
IP addresses used by the VP500 communication unit.
Basic Interface
Parameters
The basic interface parameters allow you to define the VP500
communication unit’s network “signature”.
interfaceStatic-
Group
The following parameters allow you to set static interface information
for the VP500 communication unit.
Table 4: IP Interface Parameters
Name Access Description Dynamic
interfaceQoSSignalingDSFiledValue R/W Signaling (SIP negociation) QoS Differentiated Services field
value.
Default Value : 184
Yes
interfaceQoSMediaDSFieldValue R/W Media (SIP negociation) QoS Differentiated Services field value.
Default Value : 184
Yes
interfaceMacAddress R-O VP500 communication unit Ethernet MAC address.
Default Value : 0090F8FFFFFF
N/A
interfaceUseDhcp R/W Select the provenance of the VP500 communication unit network
configuration.
0 = Static
1 = DHCP
Default Value : 1
No
interfaceDhcpServerIp R-O DHCP server IP address. The field is empty if no DHCP server
was found. N/A
Table 5: Interface Static Parameters
Name Access Description Dymanic
interfaceStaticPrimDnsIp R/W Static primary DNS server IP address.
Default Value : 192.168.0.10
No
interfaceStaticSecDnsIp R/W Static secondary DNS server IP address.
Default Value : 192.168.0.10
No
interfaceStaticDefaultRouterIp R/W Static default router IP address.
Default Value : 192.168.0.10
No
interfaceStaticSubnetMaskIp R/W Static subnet mask.
Default Value : 255.255.255.0
No
interfaceStaticLocalIp R/W Static local IP address.
Default Value : 192.168.0.1
No