Allied Telesis MIB Structure (SIP/MGCP/NCS), Reference Manual

Page: 37 / 80

Chapter 7 - portGroup Parameters MIB Reference Manual - Provisioning MIB
VP500 Communication Unit 27
portnDspCodecG729ABGroup
portnDspCodecT38Group
portnDtmfGroup
The following parameter allow you to set DTMF Transport type.
Table 33: DSP Codec G729AB Parameters
Name Access Description Dynamic
portnDspCodecG729ABEnable R/W Enable G.729.AB on Port #n.
0 = Disable
1 = Enable
Default Value : 1
Yes
portnDspCodecG729ABPTimeMin R/W Port #n minimum packetization time (ptime) for G.729.AB in ms.
WARNING : Valid values are 10, 20, 30, and 40. The default value
is used if the value is invalid.
Default Value : 10
Yes
portnDspCodecG729ABPTimeMax R/W Port #n maximun packetization time (ptime) for G.729.AB in ms.
WARNING : Valid values are 10, 20, 30, and 40. The default value
is used if the value is invalid.
Default Value : 10
Yes
Table 34: DSP Codec T.38 Parameter
Name Access Description Dynamic
portnDspCodecT38Enable R/W Enable T.38 on Port #n.
0 = Disable
1 = Enable
Default Value : 1
Yes
Table 35: DTMF Parameter
Name Access Description Dynamic
portnDtmfTransport R/W Attribute to select the type of DTMF transport.
0 = In band
1 = Out-of-Band using Signaling Protocol
2 = Out-of-Band using RTP DTMF payload
Default Value : 2
N/A