Allied Telesis MIB Structure (SIP/MGCP/NCS), Reference Manual

Page: 39 / 80

VP500 Communication Unit 29
8
syslogGroup Parameters
The Syslog Group parameters allow you to set information pertaining
to the Syslog daemon.
syslogGroup
Basic Parameters
The following parameters allow you to set basic information pertaining
to the Syslog daemon.
syslogStaticGroup
The following parameters allow you to set static information pertaining
to the Syslog daemon.
Table 36: Syslog Parameters
Name Access Description Dynamic
syslogMsgEnable R/W Enable the syslog daemon messages.
0 = Disable
1 = Enable
Default Value : 1
Yes
syslogTracingMask R/W Select the syslog mask:
0 = Absolutely no Tracing
1 = Critical errors
2 = Error conditions
3 = Warning conditions
4 = Informational messages
5 = Debug-level messages (use with care)
Higher level mask include lower level masks. e.g.: Error
conditions (2) include Critical errors (1)
Default Value : 4
Yes
syslogUseDhcp R/W Select the provenance of the Syslog configuration.
0 = Static
1 = DHCP
Default Value : 1
Yes
a
a. Only when at least one of the variables xxUseDhcp was set to 1 before starting the VP500 unit.
Table 37: Syslog Static Parameters
Name Access Description Dynamic
syslogStaticHost R/W Static Syslog server IP address or domain name.
Default Value : 192.168.0.10
Yes
syslogStaticPort R/W Static Syslog server IP port number.
Default Value : 514
Yes