VP500 Communication Unit
13
4
apaUIGroup Parameters
The apaUIGroup parameters allow you to set the various permission
settings used when making calls and to set information pertaining to
the telephony services.
apaUIMapRule-
Group Parameters
apaUIMa-
pRulexGroup
The following parameters allow you to define Dial Map Rule #n.
Note:
The Provisioning MIB contains four (4) Dialing Map Rules. The
parameter description is identical for each rule. For clarity’s sake, only
one generic set of parameters is described in this manual. When
browsing through the Provisioning MIB, replace the “x” letter in the
following parameters with the proper rule number (from 1 to 4).
Table 12:
apaUIMapRulex Group Parameters
Name
Access
Description
Dynamic
apaUIMapRulexEnable
R/W
Enable Dial Map Rule #n.
0 =
Disable
1 =
Enable
Default Value
: 1
Yes
apaUIMapRulexDialMap
R/W
Rule #n Dial Map.
Default Value
: x.T
Yes
apaUIMapRulexIsValid
R-O
Rule #n Dial Map validity.
0 =
Not valid
1 =
Valid
Default Value
: 0
N/A
apaUIMapRulexRemDigitEnable
R/W
Select if digits must be removed from the dialed number for Dial
Map Rule #n.
0 =
Disable (do not remove digits)
1 =
Enable (remove digits)
Default Value
: 0
Yes
apaUIMapRulexRemDigitCount
R/W
Number of digits to remove from the dialed number for Dial Map
Rule #n.
Default Value
: 0
Yes
apaUIMapRulexPrefixEnable
R/W
Select if digits must be prefixed to the dialed number for Dial Map
Rule #n.
0 =
Disable (do not prefix digits)
1 =
Enable (prefix digits)
Default Value
: 1
Yes
Summary of Contents for MIB Structure (SIP/MGCP/NCS)
