manualshive.com logo in svg

Allied Telesis FastPrint Server, User Manual, Page: 79 / 100

Share
Download
Allied Telesis FastPrint Server User Manual Download Page 79

Chapter 8. Management Tools

WPCONFIG

FastPrint Server User’s Guide

 

69

8.3.4.

 

Menu options

♦

 

Configuration menu

System

System

Allows you to change the FastPrint name and to set the LAN protocol(s) used by
the current FastPrint. Only the IPX and your LAN protocol should be enabled.

Note:

 

By default, all protocols are enabled. This allows operation in any
environment, but degrades performance.

Reset device

Reset device

This should be done after making any configuration changes, or if the FastPrint
stops responding.

Restore factory defaults

Restore factory defaults

This restores 

all

 values to the factory defaults. To restore only the current screen,

use the 

Set to Default

 button on the screen.

♦

 

Diagnostics menu

Print test page

Print test page

Use this option to print a test sheet from the selected FastPrint Server port. The
test printout will include status information.

Summary of Contents for FastPrint Server





































































































Reviews:

No comments