Chapter 8. Management Tools
WebAdmin
FastPrint Server User’s Guide
65
8.2.3.1.
Status
These options allow you to check the status of connected printers or FastPrint Servers.
Device information
Device information
A list of the current FastPrint Server settings will be displayed.
Printer port status
Printer port status
Click the button for any port to check the status of the attached printer, as shown
by the sample screen below.
Figure 33 WebAdmin Port Status
If the printer is bi-directional and is not busy, it can be configured by clicking the
Configuration
button. See
Printer configuration
on page 61 for details.
8.2.3.2.
Configuration
These options allow you to configure the current FastPrint.
System
System
Allows you to change the FastPrint Server name, and to set the LAN protocol(s)
used by the current FastPrint. Only the
Connected protocol
referred to on page
67, and your LAN protocol, should be enabled.
Note:
By default, all protocols are enabled. This allows operation in any
environment, but degrades performance.
Netware
Netware
Configure NetWare with this icon. See
NetWare-specific settings
on page 19 for
configuration details.
TCP/IP
TCP/IP
Use
Settings -IP addresses
to initially assign an IP address, and this button for
any subsequent changes. See
IP address configuration
on page 23 for details.
AppleTalk
AppleTalk
See
AppleTalk Settings
on page 8 for details of these configuration settings.
NetBEUI
NetBEUI
Allows NetBEUI (Windows SMB) changes to be made. For details, see
NetBEUI
Settings
on page 59.
Summary of Contents for FastPrint Server
Page 1: ...User s Manual FastPrint Server FastPrint Server Printer Sharing Device...
Page 2: ......
Page 10: ......