Allied Telesis FastPrint Server, User Manual, Page: 76 / 100

Chapter 8. Management Tools
WebAdmin
FastPrint Server User’s Guide 66
Logical port Logical port
Logical ports (printers) can be used under NetWare (see page 21) or Unix (see
page 24).
SNMP SNMP
See Preparing the FastPrint Server for SNMP on page 43 for details of the
settings available from this button.
8.2.3.3. Diagnostics
This column of buttons allows you to perform tasks that are seldom required.
Reset device Reset device
Use this option to reset the FastPrint Server. This is equivalent to a power off and
on. Resetting should be done after changing the configuration, or if the FastPrint
ceases responding after a LAN or printer problem.
Restore factory defaults Restore factory defaults
Select this option to return all parameters to their factory default settings.
Print test page Print test page
Use this option to print a test sheet from the selected FastPrint Server port. The
test page will contain status information.
Settings button Settings button
The Settings button will reveal the Setup Options screen:
Figure 34 WebAdmin Setup Options Screen
IP addresses IP addresses
See IP address configuration on page 23 for details of the IP addresses. You need
to know the FastPrint’s default name.
Note:
With the TCP/IP protocol, you must set an IP address before anything else.