Chapter 7. Windows Peer-to-Peer
Software configuration
FastPrint Server User’s Guide
51
7.5.3.2.
Configuring additional ports
Next, you must add additional ports and printers. Follow the steps below.
1.
Select the newly added printer using
Printer Manager
. Then go to the Printer menu
and select
Properties
. The following
Printer Properties
screen will appear.
Figure 12 Printer Properties (NT 3.51 PtP)
2.
In the Print to dialogue box, select
Other…
and click OK. The
Print Destinations
screen will appear:
Figure 13 Print Destinations (NT 3.51 PtP)
3.
Select
PrintServer
and click
OK
. The
Configure PrintServer
window shown
previously will appear.
4.
Enter the configuration information as described in
Software configuration
on page
47. Ensure that you select a different FastPrint Server port each time, and assign a
unique name to that port (e.g. pserv_2, pserv_3).
5.
Repeat steps 2 to 4 until all ports have been added.
6.
Install the correct printer for each port. When prompted with the following
Create
Printer
screen, ensure that the appropriate
Print to
option is selected for each
printer.
Figure 14 Create Printer (NT 3.51 PtP)
Summary of Contents for FastPrint Server
Page 1: ...User s Manual FastPrint Server FastPrint Server Printer Sharing Device...
Page 2: ......
Page 10: ......