Chapter 5. TCP/IP
Windows NT host configuration
FastPrint Server User’s Guide
34
5.5.2.
Preparing for TCP/IP Printing
If you want to create a TCP/IP remote printer, Microsoft TCP/IP printing support must
be installed. The procedure is as follows.
5.5.2.1.
Windows NT 3.51
1.
Start the
Network
option in Control Panel. When the Network Settings dialog box
appears, click
Add Software
to display the
Add Network Software
dialog box.
2.
Select
TCP/IP Protocol And Related Components
in the Network Software list box,
and then click the
Continue
button.
3.
In the
Windows NT TCP/IP Installation Options
dialog box, check the
TCP/IP
Network Printing Support
option.
4.
Click the
OK
button. Windows NT Setup will display a message asking for the full
path to the Windows NT distribution files. Provide the appropriate location and click
the
Continue
button. All necessary files will be copied to your hard disk.
5.
If you did not check the
Enable Automatic DHCP Configuration
option in the
Windows NT TCP/IP Installation Options
dialog box, you must complete all the
required TCP/IP configuration procedures manually.
6.
After you finish configuring TCP/IP, the
Network Settings
dialog box will reappear,
click the
Close
button and then restart your computer for the changes to take effect.
5.5.2.2.
Windows NT 4.0
1.
Go to Start
è
Settings
è
Control Panel
è
Network.
2.
Click the
Service
option and ensure that
Simple TCP/IP Service
and
Microsoft
TCP/IP Printing
are enabled. If they are not enabled, select the Add option and
enable them as usual.
3.
If you added services in step 2, reboot the computer for the changes to take effect.
5.5.3.
Adding a TCP/IP remote printer
5.5.3.1.
Windows 3.51
1.
From the
Printer
menu in
Print Manager
, choose
Create Printer
. Enter the following
information:
Printer name
Enter a name (up to 32 characters). This name appears in the
title bar of the printer window.
Driver
Select the appropriate driver for the attached printer.
Description
Enter a printer description for other network users to
reference.
Print to
Select
Other
.
2.
A
Print Destinations
dialog box will appear after selecting
Other
. In the
Available
Print Monitor
list, select
LPR Port
, then
OK
. Enter the following data in the
Add
LPR compatible printer
window:
Name or address of host providing
LPD
The FastPrint’s IP address.
Name of printer on that machine
The appropriate logical printer
number (e.g. L1)
Summary of Contents for FastPrint Server
Page 1: ...User s Manual FastPrint Server FastPrint Server Printer Sharing Device...
Page 2: ......
Page 10: ......