Allied Telesis AT-IMC2000T/SC, Installation Manual

Page: 38 / 58

IMC2000/200 Series Media Converter Installation Guide
38
Installing the SFP Transceiver
To install an SFP transceiver, perform the following procedure:
Note
The transceiver can be hot-swapped; you do not need to power off
the media converter to install a transceiver. However, always
remove the cable before removing the transceiver.
Note
You should always install the transceiver before connecting the
fiber-optic cable to it.
1. Remove the transceiver from its shipping container and store the
packaging material in a safe location.
Warning
An SFP transceiver can be damaged by static electricity. Be sure to
observe all standard electrostatic discharge (ESD) precautions,
such as wearing an antistatic wrist strap, to avoid damaging the
transceiver.

E86
2. Remove the dust plug from the SFP slot. See Figure 19.
Figure 19. Removing the Dust Plug from an SFP Slot
3. Position the SFP transceiver with the label facing up.