Allied Telesis AT-IMC2000T/SC, Installation Manual

Page: 19 / 58

Chapter 1: Overview
19
Figure 6. SML with Fiber Connection Down
Figure 7 shows media converter and end node L/A LED behavior with
SML enabled with a copper connection down.
Figure 7. SML with Copper Connection Down
SML Example
Scenarios with
Two Connected
Media
Converters
Following are example scenarios with two SML enabled media converters
connected back-to-back (bookend mode).
Figure 8 shows media converter and end node L/A LED behavior with
SML enabled under normal conditions.
Figure 8. SML in Normal Condition with Two Media Converters
Figure 9 shows media converter and end node L/A LED behavior with
SML enabled with a copper connection down between a media converter
and an end node.
Figure 9. SML with Copper Connection to End Node Down
IMC2000/200
Copper L/A Fiber L/A
End Node
Copper Cable Fiber Cable
Link LED Off
End Node
Link LED Blinking
LED Off LED Blinking
Media converter
IMC2000/200
Fiber Cable
End Node
Link LED On
End Node
Link LED On
IMC2000/200
Copper L/A Fiber L/A
LED On LED On
Fiber L/A
LED On
Copper L/A
LED On
Copper Cable Copper Cable
Media converter Media converter
IMC2000/200
End Node
Link LED Off
End Node
Link LED Off
IMC2000/200
Copper L/A Fiber L/A
LED Off LED Blinking
Fiber L/A
LED Blinking
Copper L/A
LED Blinking
Fiber Cable Copper Cable Copper Cable
Media converter
Media converter