ALLIANCE YU050E Installation Operation & Maintenance Download | Manualshive

Page: 54 / 99

background image

Grounding Instructions

NOTE: To ensure protection against shock, this tumble
dryer MUST be electrically grounded in accordance
with the local codes, or in the absence of local codes,
with the latest edition of the National Electrical Code
ANSI/NFPA No. 70. In Canada the electrical connec-
tions are to be made in accordance with CSA C22.1 lat-
est edition Canadian Electrical Code, or local codes.
Electrical work should be done by a qualified electri-
cian.

This tumble dryer must be grounded. In the event of malfunction
or breakdown, grounding will reduce the risk of electric shock by
providing a path of least resistance for electric current. This tum-
ble dryer must be connected to a grounded metal, permanent wir-
ing system; or an equipment grounding conductor must be run
with the circuit conductors and connected to the appropriate
ground location.

• Metal conduit and/or BX cable is not considered ground.
• Connecting the Neutral from the electrical service box to the

tumble dryer ground screw does not constitute a ground.

• A dedicated ground conduit (wire) must be connected be-

tween the electrical service box ground bar and tumble dryer
ground screw.

WARNING

To reduce the risk of electrical shock, de-energize
the electrical circuit being connected to the tumble
dryer before making any electrical connections. All
electrical connections should be made by a qualified
electrician. Never attempt to connect a live circuit.

W409R1

CAUTION

Label all wires prior to disconnection when servicing
controls. Wiring errors can cause improper and dan-
gerous operation. Verify proper operation after serv-
icing.

W071

For CE Models Only

All OPL (non-vend) models are factory-equipped with an emer-
gency stop button on the front panel. If the emergency stop func-
tion is desired on coin-operated models, an external emergency
stop button may be installed.

NOTE: Activation of the emergency stop switch stops
all machine control circuit functions, but DOES NOT re-
move all electrical power from machine.

Electrical Requirements

©

Copyright, Alliance Laundry Systems LLC -

DO NOT COPY or TRANSMIT

54

Part No. 70457901ENR12

«
...
52
53
54
55
56
...
»

Summary of Contents for YU050E




































































































Reviews:

No comments

Related manuals for YU050E

Brand: PALSON Pages: 11

Brand: Dash Pages: 25

Brand: Zanussi Electrolux Pages: 29

Brand: American Dryer Corp. Pages: 67

Brand: anko Pages: 11

Brand: nedis Pages: 108

MF200D80WB Series

Brand: Midea Pages: 44

Digital Sensor 6500FRE

Brand: BaByliss Pages: 37

Brand: Boekel Pages: 2

Brand: Taurus Pages: 14

Brand: Lagrange Pages: 44

Artist Magic Cord

Brand: OBH Nordica Pages: 28

Brand: Blue Seal Pages: 21

Brand: Modena Pages: 6

Brand: Frigidaire Pages: 9

Brand: Frigidaire Pages: 8

Brand: Frigidaire Pages: 18

Brand: Frigidaire Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands